6. Install Assemblies | Attach arms to body

06-1 Install right arm assembly -1

Right arm assembly	Body part	Screw No. 9 (M2_L6 MM20060) x4
		Box of screws

If the instructional video does not appear, please refresh/reload the page, or click the link below:

Insert【SM04 Servo Motor (ID04)】of【Right Arm assembly】into the right-side 【F7 Shoulder Joint (base)】. Note! Be careful not to interchange the arms. Observe ‘L’ and ‘R’ letters on shoulders and confirm facing of robot to ensure correct placement. Note! Do not pinch cables between the assemblies. See photos for acceptable cable location.
Fasten servo motor to base with 4 pieces【Screw No. 9 (M2_L6 MM20060)】.

A6 Tape	Screw No. 9 (M2_L6 MM20060) x4
Box of screws	Box of screws

If the instructional video does not appear, please refresh/reload the page, or click the link below:

Fasten opposite side of servo to F7 shoulder base with 4 pieces【Screw No. 9 (M2_L6 MM20060)】.
Plug【Connection Cable 07 ARM】 into socket at back of【SM03 Servo Motor (ID03)】.
Secure【Connection Cable 07 ARM】 to the outer side of【F7 Shoulder Joint (base)】 with【A6 Tape】.
Note! Make sure connection cable is firmly plugged in.
Note! Use tweezers to aid with plug placement in hard-to-reach location.

Right arm part installation finished!

Left arm part	Body part	Screw No. 9 (M2_L6 MM20060) x4
		Box of screws

If the instructional video does not appear, please refresh/reload the page, or click the link below:

Insert【SM08 Servo Motor (ID08)】of【Left Arm assembly】into the left-side 【F7 Shoulder Joint (base)】.
Note! Be careful not to interchange the arms. Observe ‘L’ and ‘R’ letters on shoulders and confirm facing of robot to ensure correct placement.
Note! Do not pinch cables between the assemblies. See photos for acceptable cable location.
Fasten servo motor to base with 4 pieces【Screw No. 9 (M2_L6 MM20060)】.

A6 Tape	Screw No. 9 (M2_L6 MM20060) x4
Box of screws	Box of screws

If the instructional video does not appear, please refresh/reload the page, or click the link below:

Fasten opposite side of servo to F7 shoulder base with 4 pieces【Screw No. 9 (M2_L6 MM20060)】.
Plug【Connection Cable 07 ARM】 into socket at back of【SM07 Servo Motor (ID07)】.
Secure【Connection Cable 07 ARM】 to the outer side of【F7 Shoulder Joint (base)】 with【A6 Tape】.
Note! Make sure connection cable is firmly plugged in.
Note! Use tweezers to aid with plug placement in hard-to-reach location.