Memory card and internal storage

You can expand the robot’s internal storage with a MicroSD card.
The robot has a single MicroSD card slot that can be used for storage expansion (up to 128GB).

Please follow the instructions below to expand the robot’s memory:

1. Prepare a blank MicroSD card.
2. Insert the card into the slot located to the left of the power button. Go to ‘Settings’ from the notification panel.
3. Then, go to ‘Storage’ from the left-hand menu. Under the heading ‘MicroSD card’, tap ‘Format disk for initial use’.
4. Follow the on-screen prompts to complete the operation.

Please note: some important system data may be stored in the MicroSD card. Removing or uninstalling the card is not recommended once the installation is complete.
We support most memory card brands and models, but cannot guarantee that all brands and models are compatible with the robot.
Please refer to the following specs when making a purchase:

• SD
• SD(HC)
• SD(XC) Class 10
• 128G SD(HC)
• SD(XC) USH1(U1Class10) 128G