Startup Process and Environment Preparation

Before you begin interacting with the robot, you need to perform the following steps.

  1. Prepare the robot and environment:
    Get enough space for the robot to move around freely, and do not place it on the edge of a table or near water.
    Check the robot’s battery level. We recommend that you fully charge the battery before using the robot to maximize your experience!
    👉 If the robot is off, press the power button on the top of the robot’s head and the battery level will be shown onscreen.
  2. Boot up the system:
    Press and hold the Home button on the top of the robot’s head for 3 seconds until the NUWA LOGO and the startup animation appear onscreen.
  3. Connect to Wi-Fi:
    When booting the robot for the first time, you will be shown a list of available Wi-Fi networks. Select the desired network and enter the correct password to connect the robot to the Wi-Fi.
  4. Log in to your Nuwa account:
    You may log in to the robot using:
    a. An email address (the same account can also be used to log in to the Code Lab and related Nuwa web services)
    b. A mobile number
    c. A Google account
Share this Doc